Runco RS-900 Series RS1100 Series Betriebsanweisung

For a floor installation, turn the four adjustable 
feet on the bottom of the projector to adjust 
the projector height and/or projection angle. 

If you do this, you may need to make keystone 
adjustments or vertically shift the image using 
the on-screen display (OSD) controls, to 
compensate. For detailed instructions, refer to 
Using the On-Screen Menus on page 50.

Proceed as follows to connect the RS-900/RS1100 to your video sources, external 
controller(s) – if present – and AC power.

When connecting your equipment:

• Turn off all equipment before making any connections.

• Use the correct signal cables for each source.

• Ensure that the cables are securely connected. Tighten the thumbscrews on 

connectors that have them.

To access the connector panel, pull 
firmly on the cable access cover to 
open it.

Connect your video sources to the RS-900/RS1100 as shown and described in the 
sections that follow.