Runco SC-30d Benutzerhandbuch

Seite von 156
12
Runco SC-30d/SC-35d Installation/Operation Manual
PRE
L
IMINAR
Y
11. DisplayPort
DisplayPort 1.1a and DisplayPort-HDCP 1.1 compliant, SD/HD input for connecting 
SDTV, EDTV or HDTV component video sources.
12. HD1 / HD2 In (15-pin VGA)
Two inputs for connecting standard-definition (SD = 480i/576i), enhanced-definition 
(ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p) component video 
sources, or RGBHV sources such as personal computers. 
13. Component / SCART In (3 x RCA connectors)
SD/HD input for connecting SDTV, EDTV or HDTV component video sources. Also 
provides RGB input for SCART RGBS sources. 
14. Video 1 / Video 2 / Video 3 In
Standard, composite video inputs for connecting a VCR, camcorder or other 
composite video source. The Video 1 input also provides composite sync input for 
SCART RGBS sources. 
15. HDMI 1 ... HDMI 8 In (Digital)
Eight (8), HDCP-compliant digital video inputs for connecting HDMI or DVI sources.
16. Ethernet
A female RJ-45 connector for wired network communications. 
17. HDMI Out (Audio Only)
Connect this output to an audio control system to pass through HDMI audio. 
18. HDMI Out (To Secondary Display)
Connect this to the SECONDARY video input on the projector. 
19. HDMI Out (To Primary Display)
Connect this to the PRIMARY video input on the projector. 
The Dimension Digital Controller does not transmit HDMI CEC 
control messages from the “HDMI Audio Out” connector. 
Note