Sony LF-B1 Benutzerhandbuch

14

If your router is configured to assign IP addresses 
by a DHCP function, and your computer is set to 
[Obtain an IP address automatically], then you 
can connect simply by connecting the computer 
and Base Station with a LAN cable (not 
supplied).

z 

Make sure the NETWORK LED on the front of the 
Base Station is turned on. If it is off, make sure the 
router is on and the LAN cable is connected properly. 

Connect the computer to a wireless router.

To make a wireless connection between a 
computer and the Base Station, set up the 
wireless network connection of the computer. 
For details, refer to the operating instructions for 
your computer and wireless LAN devices, such 
as a wireless LAN card. 

The instructions in this section are based on a 
Windows XP with Service Pack 2 installed.

Click [Control Panel] from the [Start] menu 
of Windows and then double-click [Network 
Connections].

Double-click [Wireless Network 
Connection]. 

Select the same SSID as printed on the 
sticker of the Base Station from the list of 
wireless networks and then click [Connect].