Sony LF-B1 Benutzerhandbuch
A
d
v
a
nc
ed B
ed B
a
se
Statio
Statio
n Setti
ngs
41
Setting Dynamic DNS Manually
If you want to use a Dynamic DNS service other
than the one you can set with [Easy Setup], set the
Dynamic DNS manually.
than the one you can set with [Easy Setup], set the
Dynamic DNS manually.
1
Enter the user name that you registered with
the Dynamic DNS service.
the Dynamic DNS service.
2
Enter the password that you registered with
the Dynamic DNS service.
the Dynamic DNS service.
3
Enter the URL for updating DNS information.
4
Enter the URL for detecting IP addresses.
5
Enter a renewal time for the IP Address
between 10 and 999 minutes.
between 10 and 999 minutes.
6
Click this to save changes.
You can check whether NetAV has been set up
correctly.
correctly.
1
When you click this button, a [NetAV Check]
page appears and the test begins. If [Success]
appears in the test page, click [Exit Setup] and
close the [Base Station Settings] screen. If
[Setup Incomplete] appears in the [NetAV
Check] page, read the instructions on the
[NetAV Check] page and configure the
necessary settings.
page appears and the test begins. If [Success]
appears in the test page, click [Exit Setup] and
close the [Base Station Settings] screen. If
[Setup Incomplete] appears in the [NetAV
Check] page, read the instructions on the
[NetAV Check] page and configure the
necessary settings.
z
Tip
When setting the Dynamic DNS manually, a domain
name needs to be entered after you start the NetAV test.
Follow the on-screen instructions to enter the domain
name.
name needs to be entered after you start the NetAV test.
Follow the on-screen instructions to enter the domain
name.
NetAV Check