Tascam SN29401376 Benutzerhandbuch

■

These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these 
settings apply to Dolby Pro Logic II, not Dolby Pro Logic 
IIx.

`

`

Off 

With this setting, you can broaden the width of the front 
stereo image when using the Dolby Pro Logic IIx Music 
listening mode.

`

–3 to 0 to +3

With this setting, you can move the sound field forward or 
backward when using the Dolby Pro Logic IIx Music 
listening mode. Higher settings move the sound field 
backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much 
surround sound, move the sound field forward to improve 
the balance. Conversely, if the stereo image feels like it’s 
in mono, or there’s not enough surround sound, move it 
backward.

`

0 to 3 to 7

With this setting, you can adjust the width of the sound 
from the center speaker when using the Dolby Pro Logic 
IIx Music listening mode. Normally, if you’re using a 
center speaker, the center channel sound is output from 
only the center speaker. (If you’re not using a center 
speaker, the center channel sound will be distributed to the 
front left and right speakers to create a phantom center.) 
This setting controls the front left, right, and center mix, 
allowing you to adjust the weight of the center channel 
sound.

■

`

`

`

The Height Gain Control in Dolby Pro Logic IIz enables 
the listener to select how much gain is applied to the front 
high speakers. There are three settings, “Low”, “Mid” and 
“High”, and the front high speakers are accentuated in that 
order. While “Mid” is the default listening setting, the 
listener may adjust the Height Gain Control to their 
personal preference.

• If the “Front High” setting is set to “None” (

➔ page 50), this 

setting cannot be selected.

■

`

Auto:

If the source signal contains a Dolby EX flag, the 
Dolby EX listening mode is used.

`

Manual:

You can select any available listening mode.

This setting determines how Dolby EX encoded signals are 
handled. This setting is unavailable if no surround back 
speakers are connected. This setting is effective with 
Dolby Digital, Dolby Digital Plus and Dolby TrueHD only.

• If the “Surround Back” setting is set to “None” (

➔ page 50), 

this setting cannot be selected.

■

`

`

On 

This setting specifies whether or not to apply the Late 
Night processing on a Dolby TrueHD source.

• When this setting is set to “Off”, the Late Night function for 

Dolby TrueHD sources is automatically fixed to “Off”.

■

`

0 to 2 to 5

The DTS Neo:6 Music listening mode creates 6-channel 
surround sound from 2-channel stereo sources. With this 
setting, you can specify by how much the front left and 
right channel output is attenuated in order to create the 
center channel. 
Changing the value from “0” to “5” will spread the sound 
of the center channel to left and right (outwards).