JVC SP-THS11BF Benutzerhandbuch

Advanced operations

When using the on-screen bar:

Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

Press Cursor 3/2 to highlight

Press ENTER.

Press Cursor Y/5 repeatedly to select
“A-B”.

Press ENTER at the beginning of the
part you want to repeat (point A).

Press ENTER at the end of the part you
want to repeat (point B).

A-B Repeat Playback starts.

Press ON SCREEN.

The on-screen bar disappears.

To cancel
Select “OFF” in step 4, then press ENTER.

NOTE

• When playing back a DVD VIDEO, A-B Repeat Playback is possible

only within the same title.

• “A-B” cannot be selected during Program and Random Playback.
• “A-B” cannot be selected during playback with PBC function.

You can lock the tray and prohibit the unwanted disc ejection.

On the center unit ONLY:
While the system is on standby mode, press

0 , with 7 pressed

and held.

• The system turns on and “LOCKED” appears on the display

window.

• If you try to eject the disc, “LOCKED” appears to indicate that

the tray is locked.

To cancel
Carry out the same operation again.
• The system turns on and “UNLOCKED” appears on the display

window.

You can adjust the balance between the front left and front right
speakers.

NOTE

• This function also takes effect for the sources other than DVD.
• Before you start operation;

There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.

Press SETTING, with SHIFT pressed.

Example:

Press Cursor 3/2 to make an
adjustment or selection.

Example:

The adjustment display automatically disappears a few
seconds later with the current setting.

Tray lock

Press and hold

Balance setting

B A L

C T R

B A L

-- 5

See page 17 for button locations.

TH-S11B[J].book Page 27 Tuesday, May 8, 2007 4:15 PM