JVC SP-THA55S Benutzerhandbuch

Seite von 68
References
61
MP3 Playback
JPEG Playback
FM/AM (MW)
Others
NOTE
• Problems may be caused by components connected to the center unit, so also read all manuals for the connected components carefully.
PROBLEM
POSSIBLE CAUSE
SOLUTION
A disc cannot be played. No MP3 files are recorded to the disc.
Replace the disc.
MP3 files do not have the file extension in their file 
names.
Add correct file extension (.mp3, .Mp3, .mP3 or .MP3) 
to their file names. (
A pg. 3)
MP3 files are not recorded in a format compliant with 
ISO 9660 Level 1 or 2.
Replace the disc. (Record MP3 files using a compliant 
application.)
The different types of files are recorded to the disc.
The disc which contains the different types of files may 
not be played because of its disc characteristics or 
recording conditions.
Not MP3 files but JPEG 
files are played.
The MP3/JPEG setting is set to “JPEG”.
When both MP3 files and JPEG files are recorded to a 
disc, set “MP3/JPEG” to “MP3” to play MP3 files. 
(
A pg. 53)
The MP3 control display 
appears on the TV 
screen, but no operation 
can be performed.
No MP3 files or JPEG files are recorded to the disc, or 
the disc is an unplayable disc (such as CD-ROM).
Replace the disc. (
A pg. 3)
PROBLEM
POSSIBLE CAUSE
SOLUTION
A disc cannot be played. No JPEG files are recorded to the disc.
Replace the disc.
JPEG files do not have the correct file extension in their 
file names.
Add correct file extension (.jpg, .jpeg, .JPG, .JPEG or 
any uppercase and lowercase combination such as 
“.Jpg”) to their file names. (
A pg. 3)
JPEG files are not recorded in a format compliant with 
ISO 9660 Level 1 or 2.
Replace the disc. (Record JPEG files using a compliant 
application.)
Not JPEG files but MP3 
files are played.
The MP3/JPEG setting is set to “MP3”.
When both MP3 files and JPEG files are recorded to a 
disc, set “MP3/JPEG” to “JPEG” to play JPEG files. 
(
A pg. 53)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Hard to listen to 
broadcast because of 
noise.
Antennas are disconnected.
Reconnect the antennas correctly and securely.
The AM (MW) loop antenna is too close to the center 
unit.
Change the position and direction of the AM (MW) 
loop antenna.
The supplied FM antenna is not properly extended and 
positioned.
Extend the FM antenna to the best position.
Beat Cut mode is not set properly while listening to an 
AM (MW) broadcast.
Try to change the Beat Cut mode. (
A pg. 28)
Continuous static during 
FM broadcasts.
The received signal is too weak.
Connect an external FM antenna (
A pg. 9), or contact 
your dealer.
The station is too far away.
Select another station.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The system suddenly 
turns off by itself.
The Sleep Timer or Auto Standby function is activated.
Turn the functions off. (
A pg. 21,  55)
TH-A85-55[B].book  Page 61  Friday, March 28, 2003  12:01 PM