Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Insignia
  4. NS-AV511
  5. Benutzerhandbuch

Insignia NS-AV511 Benutzerhandbuch

Download
Seite von 38
16
Insignia NS-AV511 Surround Sound Receiver
www.insigniaproducts.com
Operating your receiver
Turning your receiver on and off
To turn your receiver on and off:
1 Press ON/STANDBY on the front panel.
- OR -
Press RECEIVER, then ON/STANDBY on the 
remote control.
The receiver turns on, the display lights, and the 
STANDBY indicator turns off.
2 Press ON/STANDBY on the remote control 
again. The receiver enters standby mode.
To prevent any loud surprises when you turn on 
the receiver, always turn down the volume 
before you turn it off.
Understanding basic operations
Playing a connected component
To play a connected component:
1 Press RECEIVER, then press INPUT SELECTOR 
buttons to select the input source.
2 Start playback on the source component.
3 To adjust the volume, use the MASTER 
VOLUME control.
4 Select a listening mode and enjoy!
Displaying source information
To display source information:
• Press RECEIVER, then press DISPLAY 
repeatedly to cycle through the available 
information.
The following information can typically be 
displayed:
Using the music optimizer
The music optimizer enhances the sound quality of 
compressed music files.
To use the music optimizer:
1 Press AUDIO, then press 
 or 
 to select 
M.Optimizer.
2 Press 
 or 
 to select On.
The M.Opt indicator lights on the display.
Setting the display brightness
You can adjust the brightness of the receiver’s 
display.
To set the display brightness:
• Press RECEIVER, then press DIMMER 
repeatedly to select: Dim, Dimmer, or Normal 
brightness.
Muting the receiver
To mute the receiver:
• Press RECEIVER, then press MUTING.
The output is muted and the MUTING indicator 
flashes on the display.
Using the sleep timer
With the sleep timer, you can set the receiver to turn 
off automatically after a specified period.
To use the sleep timer:
• Press RECEIVER, then press SLEEP repeatedly 
to select the sleep time you want.
The sleep time can be set from 90 to 10 minutes, 
in 10 minute steps.
Notes
•
The on-screen setup menus appear only on a TV 
that is connected to the HDMI OUT jack. If your 
TV is connected to the MONITOR OUT V or the 
COMPONENT VIDEO OUT jacks, use the 
receiver’s display when changing settings.
•
This manual describes the procedure using the 
remote control unless otherwise specified.
Input source and volume
Notes
•
When AM or FM radio is used, the band, preset 
number, and frequency are displayed.
•
If the input signal is analog, no format 
information is displayed. If the input signal is 
PCM, the sampling frequency is displayed. If the 
input signal is digital but not PCM, the signal 
format is displayed. Information is displayed for 
about three seconds, then the previously 
displayed information reappears.
•
The input source is displayed with the default 
name even when you have selected a name. See 
“Setting up HDMI (HDMI Setup menu)” on page 
22.
Notes
•
The music optimizer function only works with 
PCM digital audio input signals with a sampling 
rate below 48 kHz and analog audio input 
signals. The music optimizer is disabled when 
the direct listening mode is selected.
•
The setting is stored individually for each input 
selector.
Tip
•
To  unmute,  press  MUTING again or adjust the 
volume.
•
Muting is also cancelled when the receiver is set 
to Standby.
NS-AV511_11-0201_MAN_.book  Page 16  Wednesday, April 13, 2011  9:31 AM