Epson V11H615920 Benutzerhandbuch

Solutions When "Not Supported" Message Appears

If the "Not Supported" message appears, try the following solutions:

• Make sure the correct input signal is selected on the Signal menu.

• Make sure the computer's display resolution does not exceed the projector's resolution and frequency

limit. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)

Parent topic:

Solving Image Problems

Related references

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• Press the Auto button on the remote control to optimize the image signal.

• Make sure you selected the correct Screen Type setting for the screen being used.

• Try adjusting the image position using the Position menu setting.

• Press the Aspect button on the remote control to select a different image aspect ratio.

• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the

projector returns to a full display.

• Check your computer display settings to disable dual display and set the resolution within the

projector's limits. (See your computer manual for details.)

• Check the resolution assigned to your presentation files to see if they are created for a different

resolution than you are projecting in. (See your software help for details.)

Parent topic:

Solving Image Problems

Related references

216