HP (Hewlett-Packard) HP 8360 Benutzerhandbuch

*RST

Turning power on, or sending 

 or 

 forces the trigger

system to the idle state. The trigger system remains in the

idle state until it is initiated by 

 or

 

 ON . Once one of these conditions is satisfied,

the trigger system exits downward to the 

state. Note that

 sets 

 : 

 OFF.

Whenever the trigger system leaves the idle state, it sets the
instrument’s Operation Pending Flag. Returning to idle clears
the flag. The 

is a special bit inside the

instrument that can affect how the instrument responds to certain

commands. You need to know this fact when using 

 

 and other commands.

Inside the Initiate State. Figure 

 illustrates the operation of the

state.

If the trigger system is on a downward path, it travels directly
through the initiate state without restrictions. If the trigger system
is on an upward path, and 

 is ON, it exits

downward to an event-detection state. If the trigger system is on an