Sony MZ-NH1 Benutzerhandbuch

There is no R-channel 
sound output when 
playing a track recorded 
from a cassette deck or 
through an amplifier, or 
when listening to sound 
from a cassette deck or 
amplifier.

• There is no R-channel output if the cassette deck or an amplifier is 

connected with a monaural cord.
, Make sure to use a stereo connecting cord. If, however, the 

connected equipment is monaural, there will be no R-channel 
sound output even with a stereo connecting cord.

The lid does not open.

• The power sources have been disconnected during recording or 

editing, or the battery have been exhausted.
, Set the power sources again, or replace the exhausted battery 

with new ones.

Editing cannot be done.

• The power source has been disconnected or a power outage has 

occurred during editing.
, The editing done to that point is not saved to the disc. Do the 

editing operation again.

Non-audio data cannot 
be erased

• Non-audio data cannot be erased with the Erase function.

, Confirm the contents by connecting the recorder to your 

computer. If it is okay to delete the contents, then perform the 
Format function (page 64).

Tracks cannot be 
combined.

• This is due to the MiniDisc system limitations. When the tracks are 

scattered and the length of each track is short*, you may not be 
able to combine the tracks.

* Combining tracks of the following lengths may not be possible.

Hi-MD mode

Linear PCM stereo: 9 seconds or less
Hi-SP stereo: 8 seconds or less
Hi-LP stereo: 32 seconds or less

MD mode

SP stereo: 12 seconds or less
LP2 stereo/Monaural: 24 seconds or less
LP4 stereo: 48 seconds or less

• You cannot combine tracks recorded in different recording modes, 

e.g., a track recorded in stereo and a track recorded in monaural; 
nor can you combine a track recorded with digital connection and a 
track recorded with analog connection.

The disc cannot edit on 
other component.

• The component does not support MDLP or Hi-MD.

, Edit on other component that support MDLP or Hi-MD.