Hoover C1660-900 Benutzerhandbuch
12
4-2
A
B
4-1
Check dirt duct
2. Remove dirt cup, look in duct (A).
3. Clear blockage from dirt duct.
3. Clear blockage from dirt duct.
Check airflow path
4. Remove hose end from cleaner.
5. Plug cleaner in and turn ON. Check
for suction at end of hose (B).
5. Plug cleaner in and turn ON. Check
for suction at end of hose (B).
a. If there is
suction
, continue with
step 6.
b. If there is
no suction
, check for
blockage in hose. Clear out hose.
4-3
Check hose inlet
6. Turn cleaner OFF and unplug.
7. Remove hose end from cleaner.
8. Press hose inlet door open and clear
any blockages.
7. Remove hose end from cleaner.
8. Press hose inlet door open and clear
any blockages.
Clearing blockages
Disconnect cleaner from electrical
outlet.
outlet.
Low suction or pick up may be due to a
blockage in the system. Refer to the fol-
lowing steps to check for blockages
blockage in the system. Refer to the fol-
lowing steps to check for blockages
continuing with each step until the
blockage is found:
blockage is found:
Turn cleaner OFF and disconnect
from electrical outlet.
from electrical outlet.
1. Check fullness of dirt cup and filter
assembly; empty cup and clean filters if
needed.
assembly; empty cup and clean filters if
needed.
®
HOOVER and are registered trademarks
8-04 C1660-900
Printed in Mexico
56511-C31