Nilfisk Alto ATTIX 590-21 Benutzerhandbuch

ATTIX 550-01/550-11 MOBIL/550-21/590-21

ATTIX 12 GALLON / ATTIX 12 GALLON RDF

ATTIX EC 12 GALLON AS/E

23

1) 

Option depending on model

Our general conditions of busi-
ness are applicable with regard 
to the guarantee.
Subject to change as a result of 
technical advances.

‡  Reduced suction power

>  Suction power selected with 

suction power control

1) 

is to 

low. 

>  Clogged suction hose/noz-

zle.

>  Seal/tank rim between the 

upper section of the cleaner 
and the dirt tank is dirty/de-
fective.

>  Filter bag is full.

>  Filter element is clogged.

·

  Set suction power in ac-

cordance with section 4.2.3. 
"Suction power control".

·

  Clean suction hose/nozzle.

·

 Clean/replace seal.

·

  See section 7.2.2 "Replac-

ing the fi lter bag".

·

  See section 4.3 "Cleaning 

the fi lter element" and 7.2.3 
"Replacing the fi lter ele-
ment".

‡  No suction power during wet 

cleaning

>  Tank is full (fl oater closes 

the suction opening).

·

  Switch off the cleaner. 

Empty the tank.

‡   Voltage fl uctuations

>  Impedance of power supply 

is too high.

·

  Use a suitable extension 

cord (see section 9.4 "Tech-
nical data").

·

  Connect the cleaner to 

another socket closer to 
the fuse box. Voltage fl uc-
tuations over 7 % should 
not occur if the impedance 
at the transfer point is 
≤ 0.15 Ω.

Make the old cleaner unusable 
immediately.

1. 

Unplug the cleaner and 

cut the power cord.

The cleaner contains valuable 
materials that should be re-
cycled. Therefore, make use of 
your local waste disposal site.

Contact your local authorities or 
your nearest dealer for further 
information.