Windsor FM12 10120030 Benutzerhandbuch

86041040 08/28/07 

 

  

1.  Carefully attach the brush nozzle to the vacuum 

cleaner through the fitting at the bottom of the 
vacuum until it locks. [See below] 

2.  Push the black end of the hose [A] into the 

connection on the filter cover [B]. 

3.  Insert the hose handle [C] into the suction opening 

on the side and press the hose into its place on 
the side of the machine, as shown.  

 
 
 
 
 
 
 
 
 
 
 
 

Your Flexamatic is operated with an electric power brush. 
The machine can be used in the upright position. 
 

bag housing is clicked in place, face forward to the center 
or the unit could overturn. 
 
Please ensure that the On/Off switch is in the OFF 
position. Turn the cable hook to release the power cable 
and plug into the walls main outlet.  
 
Now you may start your machine by moving the power 
switch to the ON position. 
 
To use the power head (12” or 15” model): 
 

1.  Press the foot pedal [D] on the rear of the power 

head and lower the machine handle to an angled 
position. The brush motor will then turn on. 

 
 
 
 
 
 
 
 
 
 
 
 

 
The hose handle can be removed from 
the side of the vacuum and can be used 
with or without attachments. Also 
maintain a grasp on the machine when 
using the hose as it could tip if the hose 
is pulled too far. 

 
The machine can also be used without 
the power head. You can easily carry 
the machine by using the carrying 
handle. 

 
When you have finished using the 
machine, turn it off by moving the power 
switch to the OFF position. Then unplug 
the power cable and wind it into the 
cable hook and handle. 

 
 

Handle

Hose 
Handle

Carrying
Handle