Samsung SU33 Series Benutzerhandbuch

* Select Models Only

assembling the cleaner

01
ASSEM

bl
IN

THE

cl
EANER

Assembling the cleaner

ATTAcH dUST bIN TO VAcUUM

Fit the groove located on the lower

front side of the Dust Bin to the hook

located on the vacuum body and

attach the hook located on the

Dust Bin Handle to the vacuum body

as shown.

ATTAcH VAcUUM HOSE ANd TOOlS

Cord Clip

Hose Clip

4. Attach the Lower Cord Wrap by lining up

the tab on the base with the corresponding

notch on the back of the vacuum and turn it

clockwise as shown.

5. Attach the Extension Wand and the Crevice

Tool together into the holder on the right side

of the body as shown.

6. Attach the Combination Tool into the holder

on the left side of the body as shown.

7. Attach the Bracket Brush on the front of the

handle and clip the Mini Turbo Brush into the

Bracket Brush as shown.

Note:

The vacuum will not operate effectively

unless the Hose Wand is firmly attached.

ATTAcH HANdlE TO VAcUUM

1. Stand the vacuum upright and slide the base of the

handle firmly into the grooves at the top of the

vacuum body.

2. Check to be sure the handle is fitted to the vacuum

body. If there is a gap, continue to push firmly until the

handle is flush.

3. Insert the screw provided from the screw packet into

the existing hole.

Tighten securely with a screwdriver.

1. Attach the Twist Snap Hose by lining up the

taps on the base with the corresponding

notches on the back of the vacuum as shown.

2. Turn the Twist Snap Hose clockwise to lock

the hose into place.

3. Grasping the Hose Wand, slide the end of the

it onto the Hose Wand Base. Snap the Hose

into the Hose Clip.