Riccar R30PET Benutzerhandbuch

6

NOTE: Do not plug in the vacuum until it  
is completely assembled.

The vacuum cleaner and the handle are 
packed separately and require assembly.

•  Remove the handle screw located on  

the back of the vacuum (Fig. 1). Insert the 
handle downward into the body of the 
vacuum (Fig. 2). Insert screw and tighten.

•  Open the bag compartment cover to 

ensure a vacuum bag is in place. 

• Your vacuum is now ready for use.

•  If storing the vacuum, wrap the cord  

clockwise around the top and bottom  
cord hooks. Fasten the plug to the 
wrapped cord using the channel on  
the plug.

•  The Quick Release Upper Cord Hook 

rotates to allow for quick access to the 
power cord. Turn the upper cord hook 
downward and you can quickly drop the 
power cord to the floor without unwinding 
it from the cord hooks (Fig. 3).

•  When storing the vacuum cleaner, turn the 

Quick Release Upper Cord Hook to the 
upright position and wrap the power cord 
around the cord storage hooks.

Fig. 1

Fig. 2

Fig. 3