Sennheiser SR 2050 IEM Benutzerhandbuch
Using the transmitter
17
왘
Place the infra-red interface of the diver-
sity receiver in front of the infra-red
interfaces of the remaining transmitters,
one after the other.
sity receiver in front of the infra-red
interfaces of the remaining transmitters,
one after the other.
–
왘
Store the frequency bank and channel
setting by pressing the jog dial on your
transmitters. You can carry out the
setting by pressing the jog dial on your
transmitters. You can carry out the
Sync
function (see right-hand column) at a
later time to establish a transmission link
between transmitters and receivers.
later time to establish a transmission link
between transmitters and receivers.
OR:
왘
Immediately synchronize your receivers
with your transmitters by carrying out the
with your transmitters by carrying out the
Sync
function (see right-hand column).
This establishes a transmission link
between transmitters and receivers.
The
between transmitters and receivers.
The
icon in the left lower corner of
the transmitter display indicates that the
Sync
function can be carried out.
–
–
To cancel the transfer:
왘
Press the
STANDBY
button on the trans-
mitter.
“ ” appears on the display panel of the
transmitter. “ ” also appears if no suit-
able receiver was found.
“ ” appears on the display panel of the
transmitter. “ ” also appears if no suit-
able receiver was found.
Easy Setup Sync
Sync