Audiovox AVX01BT3CL3 Benutzerhandbuch

Released 7-25-01.

The transmitters included with the system have been pre-programmed at
the factory, with each button pre-assigned to control a specific function of
the system. Although the system in the vehicle has either a 3, 4, or 5 channel
RECEIVER, depending on the model, the transmitters included with the
system are 7 channel transmitters. This allows you to program each
transmitter to more than one vehicle in two car families and also allows you
to change which button or buttons control certain functions of the system.
(Example: Transmitter channel 5, shown below, can be programmed to
activate Receiver channel 2.) Refer to the chart below for access to each of
the transmitter channels, and for the standard factory button assignments.

CHANNEL BUTTONS CHANNEL

FUNCTION

1

     1

Remote Arm
* Remote Emergency Panic
**Remote Door Lock

2

     2

Remote Disarm
*Remote Emergency Panic
***Remote Unlock Drivers Door
**Remote Unlock All Doors

3

     3

Push And Hold For 3 Seconds For Opt1
Release, Push 2 Times For Aux. Out.

4

     4

****  Pulsed  Output  for  Accessories

5

     5

****  Switched  Output  for  Accessories

6

     -

****  RF

7

     -

****  RF

* Remote Emergency Panic is available only on certain models.
** Door Lock/Unlock may require additional components in certain vehicles.
*** Unlock Driver Door or Unlock All Doors May Require Additional Components
**** Some of the more common accessories for these additional channels are;

Remote Car Starter

Remote Trunk Release Relay

Remote Garage Door Interface

Remote Window Roll Up