A.O. Smith BFC - 80 Benutzerhandbuch

Seite von 96
Instruction manual BFC
49
gis
8
Status of the 
appliance
8.1
Introduction
Topics covered in this chapter:
8.2
Operating modes
When running, the appliance has four basic operating 
modes, namely:
OFF
ON
EXTRA
PROG
8.2.1
OFF
In this mode, the frost protection is activated. The 
figure shows the display with the following information:
line one: the text OFF;
line two: the time, the day and alternately
and T
net
.
lines three and four: the text 
FROST PROTECTION ACTIVATED
.
8.2.2
ON
In this mode, the appliance continually responds to the 
hot water demand. The figure shows the display with 
the following information:
line one: the text ON;
line two: the time, the day and alternately
and T
net
.
line three: the programmed water temperature 
T
set
;
line four: blank when the appliance is idle, or 
depending on the heating cycle
, displays a text such as 
HEAT DEMAND
.
8.2.3
EXTRA
In this mode, one extra period is programmed and 
activated. In this mode, the OFF orPROG mode is 
temporarily overruled to fulfil a single period of 
demand. Once the period has passed, the appliance 
automatically returns to the previous operating mode. 
The figure shows the display with the following 
information:
line one: the text EXTRA;
line two: the time, the day and alternately
and T
net
;
line three: the switch-on time, and the related 
water temperature setting;
line four: the text PERIOD ACTIVATED.
OFF
13:45 Thursday
6ÉC
FROST PROTECTION
ACTIVATED
ON
13:45 Thursday
67ÉC
Tset 75ÉC
EXTRA
12:30 Thursday
76ÉC
TH 12:45
Tset 75ÉC
PERIOD ACTIVATED