Honeywell TB7300 Benutzerhandbuch

7

63-4524—01

MS/TP network must be properly terminated. For daisy chain configurations, you must install an EOL resistor at each end of the 

daisy chain. Depending on your MS/TP network configuration, the resistance value of the EOL resistor may change:

• TB7200, TB7300, or TB7600 Series devices are installed at both ends of the MS/TP network:

• 120 Ohms resistor should be installed at each end.

• A TB7200, TB7300, or TB7600 device is installed at one end of the MS/TP network and another device is installed at the other 

end:

• Install an End-Of-Line resistor value that matches the other device’s instructions regarding its EOL resistor value;

• Other devices are installed at both ends of the MS/TP network:

• Follow the other device’s instructions regarding its EOL resistor value.