Honeywell programmable thermostat Benutzerhandbuch

63-2652—01

4

System default setting is Auto. The fan default 

is set so the fan operates continuously during:

— Occupied periods,

— Heating and cooling equipment stages in 

Not Occupied and recovery periods.

NOTE: Use System and Fan keys to change 

settings.

— Auto: Thermostat automatically changes 

between heating and cooling based on 

sensed indoor temperature.

— Cool: Thermostat controls cooling.

— Off: Heating, cooling, and fan are all off.

— Heat: Thermostat controls heating.

— Em Heat: Auxiliary heat serves as first stage. 

Compressor stages are locked off.

— On: Fan operates continuously in occupied 

and standby periods. Fan cycles with call for 

heat or cool during not occupied periods.

— Auto: Fan cycles with call for heating or 

cooling during occupied, standby, and not 

occupied periods.

NOTE: This is further modified by selection of 

conventional or electric heat.

63-2652_A.fm  Page 4  Monday, May 10, 2010  4:21 PM