Intel 315889-002 Benutzerhandbuch

315889-002

41

The part number and vendor name for VRM 11.0 connectors that can be found in 

. The VRM reference in 

, is based on 

the Tyco*/Elcon* interface with the system board is a 27-pin pair edge connector. The 
connector uses latches to hold the VRM in place. The connector will be rated to handle 
a continuous load current of 130 A.

1.

These vendors are listed by Intel as a convenience to Intel's general customer base, but Intel does not 

make any representations or warranties whatsoever regarding quality, reliability, functionality, or 

compatibility of these devices. This list and/or these devices may be subject to change without notice.

2.

An alternative connector has been identified by Molex for VRMs. This alternative provides many optional 

connector variants already in production in both vertical and horizontal (right angle) implementation. 

Contact your Molex representative for pin assignment, mechanical form factor details and performance 

characteristic data.

• Single notch between pins 3 and 4 (51 and 52 opposite side).
• Single notch between pins 12 and 13 (42 and 43 opposite side).
• Single notch between pins 21 and 22 (33 and 34 opposite side).

Referencing 

, Outline Drawing, Far Side (FS) pins sequence 1 through 27, left 

to right. Near Side (NS) pins sequence 54 through 28. Pin 1 and 54 are opposite one 
another.

 shows the VRM11.0 connector pin description. Pin assignments are shown in 

Tyco / Elcon

1651929-1 (Solder Tail)
1766336-1 (Surface Mount)
1766436-1 (Press-Fit)

1

Molex

Molex iCool* VRM 24 signal 70 power pins
87787-1012 (Vertical, TH)
87786-1011 (Vertical, SM)
87818-1011 (Right Angle, TH)

1, 2