Empire Comfort Systems SR-30-3 Benutzerhandbuch

16942-3-0506

Page 16

1.  Spark electrode does not produce spark.

a.  Spark electrode broken - replace.

b.  Ignitor wire may not be attached to spark electrode - attach.

c.  Ignitor wire damaged - replace.

d.  Piezo ignitor defective - replace.

2.  Spark electrode produces spark but pilot does not light.

a.  No gas to heater - turn on gas.

b.  PILOT position not properly aligned - turn gas control knob to 

PILOT position and depress.

c.  Pilot is blocked from spider web or dirt - clean pilot, see Page 

15.

3.  Pilot flame does not stay "ON" when control knob is released.

a.  Control knob in PILOT position not completely depressed or held 

in long enough.

b.  Thermocouple  not  tightened  into  gas  control  -  tighten 

thermocouple.

c.  Pilot flame not surrounding thermocouple - clean pilot, see Page 

15. 

d.  Inlet gas pressure too low, contact gas supplier.

e.  Thermocouple defective - replace.

f.  Gas control defective - replace.

4.  Main burner does not ignite.

a.  Main burner orifice is blocked - clean, see "Main Burner Flame 

Characteristics," Page 14. Attention: The number stamped on the 

main burner orifice is a millimeter diameter.

b.  Inlet gas pressure too low, contact gas supplier.

5.  Heater keeps shutting "OFF" during normal operation.

a.  Pilot is blocked - clean pilot, see Page 15.

b.  Inlet gas pressure too low, contact gas supplier