Ingersoll-Rand 6661AX-X-C Benutzerhandbuch

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET - BRYAN, OHIO 43506



(800) 495-0276



FAX (800) 892-6276

CCN 81660326

www.ingersollrandproducts.com

OPERATOR’S MANUAL

6661AX-X-C

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

RELEASED:

9-11-89

REVISED:

9-19-13

(REV. W)

1” DIAPHRAGM PUMP

1:1 RATIO (NON-METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to “Model Description Chart” to match the pump material options.

637118-C for Air Section repair (see page 6).

637161-XX-C for Fluid Section repair (see page 4).

PUMP DATA

Models . . . . . . . see Model Description Chart for “-XXX”.

Pump Type . . . . Non-Metallic, Air Operated, Double Diaphragm

Material . . . . . . see Model Description Chart

Weight 6661A3-, 1AF-, 1AJ-, 1AL-. . . . 20.25 lbs (9.19 kgs)

6661AP-, 1AR-, 1AS-, 1AT-. . . .20.25 lbs (9.19 kgs)

6661A4-, 1AG-, 1AK-, 1AN-. . . 28.5 lbs (12.93 kgs)

6661B3-, 1BF-, 1BJ-, 1BL-. . . . . 28.8 lbs (13.06 kgs

6661BP-, 1BR-, 1BS-, 1BT-. . . . .28.8 lbs (13.06 kgs)
6661B4-, 1BG-, 1BK-, 1BN-. . . . 37 lbs (16.78 kgs)

Maximum Air Inlet Pressure. . . . . . . . . . . 120 p.s.i. (8.3 bar)

Maximum Material Inlet Pressure. . . . . . 10 p.s.i. (0.69 bar)

Maximum Outlet Pressure. . . . . . . . . . . . . 120 p.s.i. (8.3 bar)

Maximum Flow Rate (flooded inlet). . 47 g.p.m. (177.9 l.p.m.)

Displacement / Cycle @ 100p.s.i

Standard Diaphragm. . . . . . . . . . . . . . . . . 0.17 gal (.64 lit)
PTFE Composite Diaphragm. . . . . . . . . . 0.14 gal (.525 lit)

Maximum Particle Size (semi-solids) . . . .

1/8” dia. (3.2 mm)

Maximum Temperature Limits

Polypropylene

. . . . . . .

35° to 175° F (2° to 79° C)

PVDF (Kynar). . . . . . . 10° to 200° F (-12° to 93° C)

Dimensional Data. . . . . . . . . . . see page 8
Noise Level @ 70 p.s.i. - 60 c.p.m



. . . . . 64.5 db (A)





Tested with 93110 muffler installed.

 The pump sound pressure levels published here have been updated to an Equivalent Con-

tinuous Sound Level (L

Aeq

) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using

four microphone locations.

NOTICE: All possible options are shown in the chart, however, certain combina-

tions may not be recommended, consult a representative or the factory if you

have questions concerning availability.

MODEL DESCRIPTION CHART

GENERAL DESCRIPTION

The ARO Diaphragm Pump offers high volume delivery even at low air

pressures and a broad range of material compatibility options available.

Refer to the model and option chart. ARO pumps feature stall resis-

tant design, modular air motor / fluid sections.

Air operated double diaphragm pumps utilize a pressure differential in

the air chambers to alternately create suction and positive fluid pres-

sure in the fluid chambers, ball checks insure a positive flow of fluid.

Pump cycling will begin as air pressure is applied and it will con-

tinue to pump and keep up with the demand.

It will build and maintain line pressure and will stop cycling once

maximum line pressure is reached (dispensing device closed) and

will resume pumping as needed.

6661 X X - X X X - C

637161 - C

DIAPHRAGM

BALL

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: MODEL # 6661A3-311-C
FLUID SECTION SERVICE KIT # 637161-11-C

SEAT MATERIAL

2 - 316 Stainless Steel

4 - PVDF (Kynar)

3 - Polypropylene

8 - Hard 440 Stainless Steel

DIAPHRAGM MATERIAL

1- Neoprene 3 - Viton 6 - Composite PTFE 9 - Hytrel

2- Nitrile 5 - E.P.R. B - Santoprene

4 - PTFE / Santoprene M - Medical Grade Santoprene

CENTER BODY MATERIAL

A - Aluminum

B - Cast Iron

FLUIDCAP/MANIFOLD MATERIAL

3 - Colorless Polypropylene flange (3-piece manifold)

4 - PVDF (KynarR) flange (3-piece manifold)

F - Colorless Polypropylene flange (one piece manifold)

G - PVDF (Kynar) flange (one piece manifold)

J - Colorless Polypropylene, N.P.T.

(one piece manifold)

K - PVDF (Kynar), N.P.T. (one piece manifold)

L - Colorless Polypropylene, B.S.P.

(one piece manifold)

N - PVDF (Kynar), B.S.P. (one piece manifold)

P - Gray Polypropylene flange (3-piece manifold)

R - Gray Polypropylene flange (one piece manifold)

S - Gray Polypropylene, N.P.T. (one piece manifold)

T - Gray Polypropylene, B.S.P. (one piece manifold)

BALL MATERIAL

1 - Neoprane 8 - Polyurethane

2 - Nitrile A - 316 Stainless Steel

3 - Viton E - Santoprene

4 - PTFEM M - Medical Grade Santoprene

5 - E.P.R.

6661XX - X X X - C

X X

6661X3-XXX-C
6661X4-XXX-C

6661XP-XXX-C

6661XF-XXX-C

6661XG-XXX-C
6661XR-XXX-C

6661XJ-XXX-C

6661XK-XXX-C

6661XL-XXX-C

6661XN-XXX-C
6661XS-XXX-C

6661XT-XXX-C

Figure 1