3M G5 Benutzerhandbuch

Seite von 77
Appendix: Greeter Module 
  November 6 2014 – Revision 2.1 
Page 66 of 77 
3M™ Drive-Thru Systems Model G5 and Model XT-1 
Operating Instructions 
 :CHOOSE HEADSETS MESSAGES PLAYBACK TO:            
  Msg.<011> [Reminder 1  ] [REMINDER]  
[Headset 1234]<YES>
[Headset 2020]<YES> 
[XXXXXXXXXXXX]<YES>
[XXXXXXXXXXXX]<YES> 
 
3.
 
Using the , , ⊳,   and 
Enter
 keys, select a message number to 
record. 
Msg.<011>
.  
 
Note: 
Only REMINDER and ALERT messages are available for this function. 
 
4.
 
 Using the , , ⊳,   and 
Enter
 keys, select the desired headset 
YES/NO field and modify. 
[Headset 1234]<NO >
.  
 
Note: 
The headsets are given a default name, when registered, of  “Headset 
SSSS”, where SSSS is the last 4 digits of the headset serial number. The 
names can be modified in the System  
08 Headset Setup
 menu. 
Message Daypart Definitions 
The second step to configuring the greeter module is the messaging dayparts. 
This allows the system to play GREETER and REMINDER messages on a pre-
configured schedule automatically. Perform the following procedure to define 
the messaging dayparts, specifying the name, start time and end time for each: 
1.
 
Enter the greeter configuration menu. 
2.
 
 Select 
4 Message Daypart Definitions
 
     :MESSAGE DAY PART DEFINITIONS:      
   Message Day Part   Start     End      
 01:> Breakfast  <   <06:00>  <10:00>    
 02:<  Morning   >   <10:00>  <11:00> 
 
 
 
3.
 
Using the , , ⊳,   and 
Enter
 keys, select a message daypart. Use 
the keypad to modify the Daypart Name, Start Time, and End Time.  
4.
 
Repeat for up to 12 dayparts. The daypart times can be overlapping.
 
Greeter Message Properties 
The Greeter Message Properties menu is a collection of settings affecting the 
message type GREETER. 
1.
 
Enter the greeter configuration menu.  
2.
 
Select 
5 Greeter Message Properties
 
      :GREETER MESSAGE PROPERTIES:       
  Playback After Delay Of >00< Seconds.  
            Playback Mode:<Alternating>  
         Playback To The Headsets?<Yes>
 
 
Change Playback Delay Time 
Playback delay time is the number of seconds between when the vehicle detector 
detects a vehicle and when the greeter begins to playback the message. 
Perform the following procedure to change the playback delay time: