Samsung BN68-01171B-03 Benutzerhandbuch

Installing Batteries in the Remote Control
1  Lift the cover at the back of the remote control upward as 

shown in the figure.

2  Install two AAA size batteries.

➢ 

 

Make sure to match the “

+” and “–” ends of the 

batteries with the diagram inside the compartment.

 

Do not mix battery types, i.e. alkaline and manganese.

3  Close the cover as shown in the figure.

➢ 

Remove the batteries and store them in a cool and dry 

place if you won’t be using the remote control for a long 

time. The remote control can be used up to about 23 feet 

from the TV. (Assuming typical TV usage, the batteries last 

for about one year.)

➢ 

If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

1  Plug the main lead into an appropriate socket.

➢ 

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2  Press the   (Power) button (On/Off) on the front of the television or press the POWER button on the 

remote control to switch the television on. The programme that you were watching last is re-selected 

automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing 

Channels Automatically” on page 14 or “Storing Channels Manually” on page 15.

➢ 

If the television is initially powered on, several basic customer settings proceed automatically. 

Refer to “Plug & Play Feature” on page 11.

3  To switch the television off, press the   (Power) button (On/Off) on the front of the television or press 

the 

POWER button on the remote control.

4  To switch the TV on, press the   (Power) button (On/Off) on the front of the TV or press the POWER 

button or number buttons on the remote control.

BN68-01171A-03Eng_0319.indd   10

2007-03-19   ｿﾀﾈﾄ 3:39:54