Sony PDW-70MD Benutzerhandbuch

73

System Menu

  

C

h

ap
te

r 6

  

M

enu

s

The factory default setting is not to display enhanced 
items.
To display enhanced items, set the menu item MENU 
GRADE to “ENHANCED”, following the procedure in 
the previous section “Changing the settings of basic 
items”. In step 1, first select “MENU GRADE”, and next 
select “ENHANCED”, then press the SET button to save 
the setting in memory.
With this done, when you press the MENU button and the 
,/OUT button to display the setup menu, all basic and 
enhanced items on menu level 1 appear.

To change the settings of enhanced items, first carry out 
the procedure in the previous section “Displaying 
enhanced items” then proceed as follows.

In the setup menu screen, repeat steps 2 to 7 of 
“Changing the Settings of Basic Items”, and then use 
the 

</IN, ,/OUT, M/MARK1,  m/MARK2 buttons 

to select a menu item and change the setting.

When you have completed the settings, press the SET 
button.

The message “NOW SAVING...” appears on the 
monitor screen, and “Saving...” appears in the time 
counter display, while the new settings are saved in 
memory.
When the saving operation is completed, the monitor 
screen and time data display section return to their 
normal indications.

After making menu setting changes, to return settings to 
their factory default settings (setting initialization), use the 
following procedure.

To return a particular setting to its factory default 
setting
In the section “Changing the settings of basic items” (page 
71), carry out the procedure up to step 5, then with the 
current setting displayed (in the example, if the factory 
default setting has been changed, the current setting will be 
TC MODE), proceed as follows.

Press the RESET button.

“OFF” (factory default setting) is selected.

Press the SET button.

The setting returned to its factory default is saved in 
memory as the current setting.

Right-pointing arrow (

c) at 

the right of a menu item

See step 1 of the foregoing 
operating procedure (see 
page 71).

Pressing the 

,/OUT button 

switches to the next lower 
menu level or to a setting 
selection screen.

Left-pointing arrow (

C) at 

the left of a menu item
See step 2 of the foregoing 
operating procedure (see 
page 72).

Pressing the 

</IN button 

returns to the previous (higher) 
menu level.

Character string at the 
right of a menu item

Current setting of the menu 
item
When shown with a colon (:): 

the current setting is the 
same as the factory default 
setting.

See step 2 of the foregoing 
operating procedure (see 
page 72).

dot (·): the current setting 
is different from the factory 
default setting. 

An * (asterisk) in a 
complete list of settings

See step 4 of the foregoing 
operating procedure (see 
page 72).

Factory default setting

SETUP MENU

OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
DISC PROTECTION
VIDEO CONTROL
AUDIO CONTROL
INTERFACE SELECT
METADATA
SETUP BANK OPERATION

MENU GRADE

 

ENHAN

Current setting