Sony MZ-M200 Handbuch
Setting for recorder display (“EL Light”)
Notes
• Even when “EL Light” is set to “Auto Off”, the
display window will not turn off while:
— the recorder is being used with the AC power
— the recorder is being used with the AC power
adaptor.
— charging the rechargeable battery.
— the recorder is connected to a computer.
— a menu item is being selected.
— the recorder is fast forwarding, fast rewinding,
— the recorder is connected to a computer.
— a menu item is being selected.
— the recorder is fast forwarding, fast rewinding,
or using AMS.
— the Divide Rehearsal function is being
performed.
— messages are displayed.
• If the battery grows weak during recording (the
level indication appears as
), the display
window darkens to conserve battery power
regardless of the “EL Light” setting.
regardless of the “EL Light” setting.
• The operation lamp does not turn off even when
“EL Light” is set to “Auto Off”.
Setting for quick mode (“Quick Mode”)
Note
When “Quick Mode” is set to “On” (“Quick On” on
the remote), power continues to flow in the recorder
even when it is not being operated. The power is
automatically cut off when the batteries become
drained.
the remote), power continues to flow in the recorder
even when it is not being operated. The power is
automatically cut off when the batteries become
drained.
Setting for disc mode (“Disc Mode”)
Notes
• Even if you select “MD” as the “Disc Mode”
setting, the operation mode can only be “Hi-MD”
when using a 1GB Hi-MD disc.
when using a 1GB Hi-MD disc.
• The operation mode set in the “Disc Mode” menu
is applied to a blank 60/74/80-minute standard
disc used on the recorder even if a different
operation mode was selected in the SonicStage
software or a different operation mode appeared
on the display after the disc was formatted by the
SonicStage software.
disc used on the recorder even if a different
operation mode was selected in the SonicStage
software or a different operation mode appeared
on the display after the disc was formatted by the
SonicStage software.
Setting for the /LINE OUT jack (“Audio
Out”)
Notes
• If “Audio Out” is set to “Line Out”, Virtual
Surround, 6-Band Equalizer, or Dynamic
Normalizer will not function.
Normalizer will not function.
• “Audio Out” cannot be set to “Line Out” when the
remote is connected.
• When you connect the headphones/earphones
directly to the recorder, make sure to set “Audio
Out” to “Headphone”.
Out” to “Headphone”.
• When “Audio Out” is set to “Line Out”, do not
connect the headphones/earphones. The sound
from the headphones/earphones will be very loud.
from the headphones/earphones will be very loud.
• If the recorder is connected to a component such
as an active speaker and “Audio Out” is set to
“Headphone”, make sure to set “Beep” to “Off”
(“Beep Off” on the remote).
“Headphone”, make sure to set “Beep” to “Off”
(“Beep Off” on the remote).
60
MZ-RH1/MZ-M200.GB.2-669-084-11(1)