Sony MZ-R500PC Handbuch

Insert a disc and play the track you 
want to label.

Press ENTER, press 
>MENU. repeatedly until 
“EDIT” flashes in the display, and 
then press ENTER again.
“

” and “Name” flash in the 

display.

Press ENTER. 
The track is ready to be labeled.

Follow steps 3 to 5 of “Labeling a 
disc during stop”.

While recording, press ENTER, press 
>MENU. repeatedly until 
“EDIT” flashes in the display, and 
then press ENTER again.
“

” and “Name” flash in the 

display.

To label a track, press ENTER again.
To label a disc, press 
>MENU. repeatedly until 
“

” and “Name” flash in the 

display.
The track or disc is ready to be 
labeled.

Follow steps 3 to 5 of “Labeling a 
disc during stop”.

To cancel labeling, press x.

• When the recording is stopped while labeling 

a track or a disc during recording, or when the 
recording moves on to the next track while 
labeling a track, the input at that point is 
entered automatically.

• “LP:” has automatically been added at the 

beginning of track names for tracks recorded 
in LP2 or LP4.

Follow the steps corresponding to the 
labeling method until the disc or track is 
ready to be labeled. Enter a new character 
over the one you want to change, then 
press ENTER.

• You cannot relabel premastered MDs or label 

MDs that have not been recorded.

• The recorder is able to display, but cannot 

label using Japanese “Katakana” characters.

• The recorder cannot rewrite a disc or track 

name of more than 200 letters that was created 
by another device.