Panasonic WJ-HD716K/G Benutzerhandbuch

22

When it is necessary to enter characters such as when setting the camera titles on the setup menu, use the 
software keyboard for character entry that can be displayed by pressing the [SET] button after moving the cur-
sor onto the entry field.
     

Functions of each button on the right of the software keyboard are as follows. 
     

Console

[← →] button
Moves the cursor to the right and left in the console 
on the upper side of the keyboard.

[Del] button
Deletes a character on the cursor in the console.

[A/a] button
Changes the letter entry mode of the keyboard 
between the capital letter entry, the lower-case letter 
entry and the mark entry.
     

The software keyboard for character entry can be operated as follows.
Up to 255 characters can be entered. 
     

Move the cursor onto a desired character using the 
arrows button (

C D A B), and then press the [SET] 

button.
 →  The selected character will be displayed in the 

console and the cursor will move to the right. 

Repeat step 1 to continue entering characters. 
     

Move the cursor onto the [Enter] button using the 
arrows button (

C D A B) when the character entry 

is complete, and then press the [SET] button.
 →  The entered characters will be applied and the 

software keyboard for character entry will close. 

 •  It is possible to delete a character on the cursor in

the console by pressing the [STOP] button on the 
front panel. 

 •  It is also possible to delete all characters in the

console by holding down the [STOP] button for 2 
seconds or more.