Panasonic WJ-HD716K/G Benutzerhandbuch

54

 •  To delete the set detection area, take the following

procedures.

  

1.  Move the cursor onto the [Area delete] button 

on the search filter window, and then press the 
[SET] button. 

 

2.  Move the cursor onto the [Area] button of any 

of the detection area (A - D), and then press 
the [SET] button.

 
 4.  Set the detection sensitivity of each detection 

area. 

    Move the cursor onto "Sensitivity" of the detection 

area to be set, and then rotate the jog dial (inside) 
to select the detection sensitivity from the follow-
ing. 
Off: Does not detect motion in the selected area. 
Low: Low sensitivity 
Mid: Standard sensitivity 
High: High sensitivity 

 5.  Set the mask duration of each detection area. 
    When the mask duration is set, any motion will not 

be detected for the set duration after a motion 
detection. Use the mask duration when it takes 
time to detect motion or when motion is detected 
frequently. 

    Rotate the jog dial (inside) to select the detection 

sensitivity from the following. 

    1 s, 1 min, 1 h, 24h 
     

After specifying the search conditions (filters), press 
the [SET] button after moving the cursor onto the [

B] 

button. 
 →  Data matched the search conditions (filters) will be 

displayed on the VMD search list window. 

Select time and date of recorded data from the list to 
play. To select a recorded data in which motion was 
detected, rotate the jog dial (inside). 

 •  When the shuttle ring (outside) is rotated, the pre-

vious/next page of the list will be displayed.