Aiwa XR-X77 Benutzerhandbuch
12
En
TIMER OPERATIONS
Setting the clock
1
Hold down SHIFT and press CLOCK on the remote
control.
When the unit is turned off, you can also press SET.
control.
When the unit is turned off, you can also press SET.
2
Within 6 seconds, press f or g to set the
time.
Each press changes the time in 1-minute steps.
Holding these buttons down will vary the time in 10-minute
units.
time.
Each press changes the time in 1-minute steps.
Holding these buttons down will vary the time in 10-minute
units.
3
Press SET.
The time display stops flashing and the clock starts from
00 seconds.
The time display stops flashing and the clock starts from
00 seconds.
f
,
g
POWER
CLOCK
TIMER
VOLUME
+
,
-
SET
SHIFT
SLEEP
TUNER/BAND,
AUX,
AUX,
E
CD,
s
POWER
6
STANDBY/ON
f
,
g
SET
TUNER/BAND, AUX,
E
CD
s
VOLUME
To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote control.
The time will be displayed for 6 seconds.
Hold down SHIFT and press CLOCK on the remote control.
The time will be displayed for 6 seconds.
To switch to the 24-hour standard
Display the time and press s within 6 seconds.
With each press, the clock alternates between 12- and 24-
hour standard time.
Display the time and press s within 6 seconds.
With each press, the clock alternates between 12- and 24-
hour standard time.
Tip:
In the 12-hour standard, "AM12:00" indicates midnight and
"PM12:00" noon.
In the 12-hour standard, "AM12:00" indicates midnight and
"PM12:00" noon.
If the clock display flashes when the unit is turned
off
There has been a power interruption. Reset the clock.
off
There has been a power interruption. Reset the clock.
Sleep timer
Turns off the unit automatically after a specified time.
1
Press SLEEP on the remote control.
"SLEEP" is displayed.
"SLEEP" is displayed.
2
Within 6 seconds, press f or g repeatedly
to set the sleep timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
for 6 seconds, the current setting is entered automatically.
The unit turns off after the selected time.
to set the sleep timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
for 6 seconds, the current setting is entered automatically.
The unit turns off after the selected time.
To check the remaining time until the unit turns off
Press SLEEP on the remote control. The remaining time is
displayed for 6 seconds.
Press SLEEP on the remote control. The remaining time is
displayed for 6 seconds.
To cancel the sleep timer
Press SLEEP on the remote control repeatedly so that "SLEEP
oFF
Press SLEEP on the remote control repeatedly so that "SLEEP
oFF
" is displayed.