TEAC CD RECEIVER Benutzerhandbuch

If you experience a problem with this unit, please check 
the following items before requesting service. If it still does 
not operate correctly, contact the retailer where you pur-
chased the unit or TEAC customer support (See the back 
cover for contact information).

e

 Check that the power cord is completely plugged into 

the power outlet.

e

 Select the source using the SOURCE button.

e

 Check the connection to the speakers.

e

 Adjust the volume.

e

 Unplug headphones from the PHONES jack.

e

 If “MUTE” is displayed, press the MUTE button.

e

 The unit is too close to a TV or similar device. Install 

the unit away from such devices, or turn them off.

e

 Press the STANDBY/ON button to turn the unit on.

e

 If the batteries are exhausted, change the batteries.

e

 Point the remote control at the front panel of the unit 

from a distance of less than about 5 m (16 ft).

e

 Clear obstacles between the remote control and the 

main unit.

e

 If a strong light is near the unit, turn it off.

e

 Load a disc with the label side up.

e

 If the disc is dirty, clean the surface of the disc. 

e

 If a blank CD-R/CD-RW has been loaded, load a 

prerecorded disc.

e

 This unit might not be able to play some CD-R/CD-RW 

discs depending on the disc quality and recording 
conditions.

e

 You cannot play back unfinalized CD-R/RW discs with 

this unit. Finalize such a disc in the CD recorder you 
used to create the disc and try again.

e

 Place the unit on a stable place to avoid vibrations 

and shocks.

e

 If the disc is dirty, clean its surfaces.

e

 Do not use scratched, damaged or warped discs.

Continued on the next page 

e