Numark Industries AXIS 8 Benutzerhandbuch

 

 

 

Open/Close: Press to load or eject the disc.   The drawer will automatically close to protect the tray from accidental 

damage while open.  NOTE: Tray will not open if the disc is in play.  In order to program the automatic close 

time press and hold 

 followed by 

.   The display will indicate options of 30 seconds, 60 seconds, 120 

seconds, and (no) for no auto close.  This setting will be remembered at power down. 

 

 

Play/Stutter: Starts the music from either the first set cue point or the last point of pause.   By starting from the last pause 

point while the unit is paused a new cue point is set.   Pressing this button while the unit is in play restarts the 
unit from the last cue point, creating a “stutter” effect.    

 

Startup speed of initial play can be adjusted by pressing 

 followed by 

 and then rotating the wheel 

until the desired seconds of startup are shown.  Pressing 

 followed by 

 twice will toggle startup 

between 0 to the desired seconds.   This setting will be remembered at power down. 

Pause: Stops the music while in play.  Pressing play following this sets a new cue point.  Holding down the button while 

scratching or stuttering the music will stop the music at the current position, allowing you to capture a loop in or 

cue point.  Pause speed (BRAKING) can be adjusted, by pressing 

 followed by 

 and then rotating 

the wheel until the desired seconds of startup are shown.  Pressing 

 followed by 

 twice will toggle 

startup from 0 to the desired seconds.   This setting will be remembered at power down. 

    

Cue: Returns and pauses the music at the last set cue point.   The cue point is the last place in which the 

unit was paused and then play was pressed.   Pressing a second time allows for temporary play of 
this point. You can easily edit the cue point by turning the wheel.  As you rotate the wheel the 

music will sound.  By stopping the wheel and pressing play a new point is set.    

 

The sound during wheel rotation can be adjusted from a smooth “scratch” sound to the tradition 

“stutter” sound.  To alternate modes hold 

 followed by 

.  The display will indicate “SCRATCH” when 

the scratch sound is active.  This indication will go away when the style of cue is stutter. This setting will be 

 
 

Time: switches the time modes on the display between elapsed playing time, remaining time on the track and remaining 

time on the entire CD. This setting will be remembered at power down. 

 
 

Single: toggles the unit to play back just one track at a time (single) or play continuously through all tracks and then start 

over repeating the CD infinitely (continuous). This setting will be remembered at power down. 

 
 

Track Selection: Rotate the dial to quickly find the desired track  To advance by +10, press the knob while rotating. 

    
Search: Pressing the selector changes the mode of the jog wheel to a search mode.  Search will remain 

active while the wheel is being moved and for 8 seconds after.  Moving the wheel clockwise 

rapidly moves forward through the music.   Counterclockwise moves backwards through the 

music.  There are 2 search speeds depending upon wheel rotation speed.  

 

©2002 Numark Industries 

- 8 - 

http://www.numark.com