Numark Industries CDN-88 Benutzerhandbuch
CDN-88 Dual CD Player
- The Leader in DJ Technology
©2000 Numark Industries
- 3 -
http://www.numark.com
115V
230V
WARNING: To reduce the risk of fire or electrical shock,
do not expose this appliance to rain or moisture.
Electrical equipment should NEVER be kept or stored in
damp environments.
do not expose this appliance to rain or moisture.
Electrical equipment should NEVER be kept or stored in
damp environments.
DANGER: INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO BEAM.
OPEN AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO BEAM.
CAUTION: This product utilizes a laser. Use of
controls or adjustments other than those specified
herein may result in hazardous radiation exposure.
controls or adjustments other than those specified
herein may result in hazardous radiation exposure.
NOTICE CONCERNING FCC REGULATIONS
This equipment generates and uses radio frequency energy
and may cause interference to radio and television reception if
you do not operate it in strict accordance with the procedures
detailed in this OPERATING MANUAL.
This unit complies with Class B computing device rules in
accordance with the specifications in Sub-part J or Part 15 of
the FCC Rules, which are designed to provide reasonable
protection against such interference in a residential installation.
There is no guarantee, however, that interference will not occur
in a particular installation. If the unit does cause interference
to any radio or television reception, try to reduce it by one or
more of the following means:
and may cause interference to radio and television reception if
you do not operate it in strict accordance with the procedures
detailed in this OPERATING MANUAL.
This unit complies with Class B computing device rules in
accordance with the specifications in Sub-part J or Part 15 of
the FCC Rules, which are designed to provide reasonable
protection against such interference in a residential installation.
There is no guarantee, however, that interference will not occur
in a particular installation. If the unit does cause interference
to any radio or television reception, try to reduce it by one or
more of the following means:
a) Reposition the other unit and/or its antennae
b) Move this unit
c) Move this unit and the other unit(s) further apart
d) Plug this unit into a different AC outlet so that it is
on a different circuit from the other equipment.
b) Move this unit
c) Move this unit and the other unit(s) further apart
d) Plug this unit into a different AC outlet so that it is
on a different circuit from the other equipment.
This note is in accordance with Section 15.838 of the FCC
Rules.
Rules.
This unit does not exceed the Class B limits for radio noise
emission from digital apparatus set out in the radio interference
regulations of the Canadian Department of Communications.
emission from digital apparatus set out in the radio interference
regulations of the Canadian Department of Communications.
DOUBLE INSULATED - When servicing use only identical replacement parts
For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet.
LINE VOLTAGE SELECTION
1) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the main unit, using a screw driver.
2) Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage.
3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman.
2) Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage.
3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman.
MOUNTING YOUR CD PLAYER
1. Mount the units in your console or rack with 19” EIA rails
2. The transport should be mounted not to exceed an angle of 15 degrees.
2. The transport should be mounted not to exceed an angle of 15 degrees.
Your CD player can be affected by excess vibration so mount the units in a secure environment if possible.
Please record the serial number of your unit as shown on the back of the chassis as well as the
name of the dealer from whom you purchased the unit. Retain this information and your original
purchase receipt for your records. Please return the enclosed warranty card to register your CD
player with us.
name of the dealer from whom you purchased the unit. Retain this information and your original
purchase receipt for your records. Please return the enclosed warranty card to register your CD
player with us.
MODEL: __________________________
PURCHASED FROM:_________________________
SERIAL NUMBER:___________________
DATE OF PURCHASE:________________________
SERVICE INSTRUCTIONS
• Disconnect power cord before servicing
• Replace critical components
only with factory
parts or recommended equivalents
•
For AC line powered units - Before returning repaired unit
to user, use an ohmmeter to measure from both AC plug
blades to all exposed metallic parts. The resistance should
be no more than 100,000ohms.
to user, use an ohmmeter to measure from both AC plug
blades to all exposed metallic parts. The resistance should
be no more than 100,000ohms.