Numark Industries AXIS 9 Benutzerhandbuch

©2001 Numark Industries

- 9 -

http://www.numark.com

1.  CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.

2.  PAUSE (II)- Active when the unit is paused.

3.  PLAY (>)- Active while the unit is actually playing a CD.

4.  TRACK - Shows the track that the unit is playing.

5.  TOTAL – indicates when total CD remaining tracks are displayed.

6.  MINUTES - Shows the minutes elapsed or remaining depending on mode setting.

7.  SECONDS - Shows the seconds elapsed or remaining depending on mode setting.

8.  FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or

remaining depending on mode setting.

9.  AUTOSTART – will light when the unit is set to relay from CD unit to CD unit.

10.  CONTINUOUS PLAY – Shows when the unit is set to play back the entire CD without stopping between tracks.

11.  SINGLE PLAY- Shows when the unit is set to play just one track at a time.

12.  CD IN – indicates a standard CD is in the unit.

13.  TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time depending on the setting of the

“time” button.

14.  (Remain) indicates when track remain time is displayed.

15.  (Total) indicates when total CD remain time is displayed

16.  SEARCH – indicates when the unit is searching through the music

17.  Numeric display - indicating either current pitch or BPM

18.  PITCH - is lit when pitch is being displayed

19. 

BPM – is lit when BPM is being displayed