Numark Industries MPCD33 Benutzerhandbuch

 

a) Read 

Instructions - All the safety and operating instructions should be read 

before this product is connected and used. 

b) Retain 

Instructions - The safety and operating instructions should be kept 

for future reference. 

c) Heed 

Warnings - All warnings on this product and in these operating 

instructions should be followed. 

d) Follow 

Instructions - All operating and other instructions should be followed. 

e) Placement 

– place the unit in a clean dry location. 

f) 

Water and Moisture - This product should be kept away from direct contact 
with liquids. The apparatus shall not be exposed to dripping or splashing 
and that no objects filled with liquids, such as vases, shall be placed on the 
apparatus. 

g) Temperature- Avoid placing this product to close to any high heat sources 

such as radiators.  Do not use this unit at temperatures below 41

°

F/5

°

C or 

higher than 95

°

F/35

°

C. 

h) Ventilation 

- The appliance should be situated so that it’s location or 

position does not interfere with it’s proper ventilation.  For example, the 
appliance should not be situated on a bed, sofa, rug, or similar surface that 
may block the ventilation opening; or, placed in a built-installation, such as 
bookcase or cabinet that may impede the flow of air through the ventilation 
openings. 

i) 

Power Sources - This product should be connected to a power supply only 
of the type described in these operating instructions, or as marked on the 
unit. 

j) 

Power Cord Protection - Power supply cords should be routed so that they 
are not likely to be walked upon or pinched by items placed on or against 
them.  When removing the cord from a power outlet be sure to remove it by 
holding the plug attachment and not by pulling on the cord. 

k) 

Object and Liquid Entry - Take care that objects do not fall into and that 
liquids are not spilled into the inside of the mixer. 

l) Cleaning 

– The appliance should be cleaned only as recommended by the 

manufacturer.  Do not use chemical solvents to clean the unit. 

m) Non-use 

Periods – The power cord of the appliance should be unplugged 

from the outlet when left unused for long periods of time.  

n) 

Damage Requiring Service - Only qualified personnel should service this 
product.  If you have any questions about service please contact Numark at 
the number(s) shown on the back cover of this manual. 

o) 

Grounding or Polarization - Precautions should be taken so that the 
grounding or polarization means built into the CD player is not defeated. 

p) 

Internal/External Voltage Selectors - Internal or external voltage selector 
switches, if any, should only be reset and re-equipped with a proper plug 
for alternative voltage by a qualified service technician. Do not attempt to 
alter this yourself. 

q) 

Carts and Stands －The appliance should be used only with a cart or stand 
that is recommended by the manufacturer of the cart or stand.     An 
appliance and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the appliance and cart 
combination to overturn. 

•

 

Disconnect power cord before servicing

•

 

Replace critical components 

  only with factory parts or

recommended equivalents

•

 

For AC line powered units - Before returning repaired unit to user,
use an ohmmeter to measure from both AC plug blades to all exposed
metallic parts.  The resistance should be no more than 100,000ohms.

 

DANGER:  INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK 
FAILED OR DEFEATED.  AVOID DIRECT EXPOSURE TO BEAM. 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK 

DO NOT REMOVE ANY COVER.  NO USER- 

SERVICEABLE PARTS INSIDE. REFER SERVICING  TO 

QUALIFIED SERVICE PERSONNEL ONLY. 

The lightning flash with arrowhead symbol within the 

equilateral triangle is intended to alert the user to the 

presence of un-insulated “dangerous voltage” within the 

product’s enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock. 

TO PREVENT ELECTRIC SHOCK DO NOT USE 

THIS (POLARIZED) PLUG WITH AN 

EXTENSION CORD, RECEPTACLE OR OTHER 

OUTLET UNLESS THE BLADES CAN BE FULLY 

INSERTED TO PREVENT BLADE EXPOSURE.

 

WARNING: To reduce the risk of fire or electrical shock, do not expose this 
appliance to rain or moisture. Electrical equipment should NEVER be kept or 
stored in damp environments. 
 
NOTICE CONCERNING FCC REGULATIONS 
This equipment generates and uses radio frequency energy and may cause 
interference to radio and television reception if you do not operate it in strict 
accordance with the procedures detailed in this OPERATING MANUAL. 
This unit complies with Class B computing device rules in accordance with 
the specifications in Sub-part J or Part 15 of the FCC Rules, which are 
designed to provide reasonable protection against such interference in a 
residential installation.  There is no guarantee, however, that interference will 
not occur in a particular installation.  If the unit does cause interference to any 
radio or television reception, try to reduce it by one or more of the following 
means: 
 

a)  Reposition the other unit and/or its antennae 

 

b)  Move this unit 

 

c)  Move this unit and the other unit(s) further apart 

 

d)  Plug this unit into a different AC outlet so that it is 

 

on a different circuit from the other equipment. 

This note is in accordance with Section 15.838 of the FCC Rules. 
 
This unit does not exceed the Class B limits for radio noise emission 
from digital apparatus set out in the radio interference regulations of 
the Canadian Department of Communications. 

 
 

 

 

For 220-volt use in USA, use NEMA style 220-volt plug.  For other countries use proper plug for local outlet. 

©2002 Numark Industries 

- 2 -

 http://www.numark.com