Hans Grohe AlFie Aquasaur Merkblatt

The Fun Handshower

Replacing exisTing sHoweRHead wiTH alFie

enclosed you will find complete 

instructions for installing alfie 

the aquasaur, a brightly colored 

handshower that makes showering fun.  

designed for the young at heart, alfie 

features two spraymodes and unique 

self-cleaning whiskers.

alfie the aquasaur is just one of a full 

range of Hansgrohe products for bath 

and kitchen.  each product has been 

carefully designed to be safe, reliable, 

and easy to use.

if you would like to receive further 

information on Hansgrohe, please call 

us at 800 334 0455.

•

Unscrew existing showerhead from shower 

arm.

•

clean threads on shower arm with steel 

wool and wrap the threads with Teflon

TM

 

tape.

•

place a hose washer in the shorter of the two 

hose end connectors on the Techniflex hose.  

screw this end of the hose to the shower 

arm.  if wrench tightening is necessary, use 

a cloth to protect the finish.

•

place a second hose washer in the longer 

hose end connector.  attach this end to alfie 

and hand tighten.

•

support alfie with a stationary handshower 

support (28321000), or an angle-adjustable 

porter’e handshower support (27504000).

•

note:  see instructions provided with 

individual products for additional installation 

guidelines.

•

note:  Hansgrohe recommends the use 

of external vacuum breaker (06510000) 

between the shower arm and Techniflex 

hose.

adding alFie To an exisTing sHoweRHead 

wiTH inveRsa diveRTeR

•

Remove existing showerhead from the 

shower arm.  if it is necessary to use a 

wrench, protect the showerhead and shower 

arm connector with a cloth.

•

clean the shower arm threads with steel 

wool and wrap with Teflon

TM

 tape.

•

attach inversa diverter (28719000) to 

shower arm.  wrench tighten, using a cloth 

to protect the finish.  wrap both outlets of 

the inversa with Teflon

TM

 tape.

•

Reattach the showerhead to the front outlet 

of the inversa diverter and wrench tighten.

•

place a hose washer in the shorter hose 

end connector.  screw the shorter hose end 

connection to the side outlet port of the 

inversa.

•

place a hose washer in the longer hose end 

connector.  attach this end to alfie and hand 

tighten.

•

Use handshower support (28321000) to 

support alfie.

THe  Following

insTallaTion opTions Re-

qUiRe in-wall 

plUMbing

insTallaTion by a 

pRoFessional plUMbeR is 

ReqUiRed.

90743105  03/2008

Please note:  in Massachusetts, the 

maximum output water temperature can 

be no higher than 112°F.