Honeywell 107324A Benutzerhandbuch

68-0040—04

2

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).

2. Honeywell Customer Care

1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

Immersion Wells: Allow heat transfer while protecting sensing 

bulb from controlled medium and seal off tapping to permit 

bulb removal without draining the boiler. Available in 

copper, stainless steel, mild steel and Monel. See Table 1 

for copper. See Table 2 for stainless steel, mild steel and 

Monel.

Compression Fittings: Allow bulb insertion directly into the 

controlled medium with boiler draining. Can also be used to 

provide positive seal in duct applications. Available in brass 

and stainless steel. See Table 3.

Element Holders: Support bulb and capillary or averaging 

element in a duct. See Table 4.

See Tables 1, 2, 3 and 4, and Fig. 1 and 2.

Wells:

Copper: 300°F (149°C) maximum.

Other Materials: Maximum temperature rating limits of the 

controller sensing bulb and capillary.

Capillary Compression Fittings: 250°F (121°C) maximum.

Element Holders:

311266D Bulb Holder: -40°F to +100°F (-40°C to +38°C).

Other Element Holders: Maximum temperature rating limits 

of the controller sensing bulb and capillary.

Copper Wells: 255 psi (1758 kPa) at 300°F (149°C).

Other Wells: 1500 psi (10,342 kPa) at 700°F (371°C).

Capillary Compression Fittings:

Water: 50 psi (345 kPa)

Air: 15 psi (103 kPa).

See Tables 5 and 6.

PACKING 

NUT

INSULATION DEPTH

MINIMUM 

INSERTION LENGTH

SLOTTED 

BRASS 

WASHERS (4)

TUBING

COMPOSITION DISK

FITTING FOR 1/2 

OR 3/4-14 NPT 

TAPPED HOLE

APPROXIMATELY 4-3/4 IN.

M17260