Axor 10100801 Benutzerhandbuch

09/2005

Attention:  The mixer must connected to angle valves with integrated filter.

The mixer can not  used together with a continuous flow water heater.

1.  Flush through the supply pipes.

2.  Place the mixer including the sealing washer in position on the basin.

3.  Slip the slide washer, washer and collar nut over the threaded base and tighten the  

     collar nut by hand.

4.  Tighten screws.

5.  Connect the connecting hose to the angle valves; cold right - hot left.

6.  Install the battery (please see Exchange battery)

Large differences in pressure between the hot and cold water supply should be balanced.

The water temperature is adjusted by the adjusting lever.

swivel forward = hot water,

swivel backward = cold water.

This mixer have following feature:

background fade-out with integrated range adjustment, that means the mixer is automati-

cally adjusted on to the local  conditions (washbasin, brightness, reflection) by the sensory 

mechanism.

The mixer operates with a 6 V Lithium-Battery

(DL 223A). The working life of the battery is 2 years by extremely operation. Over night 

the current consumption is reduced by a economy mode.

Push a small hexagon socket screw key into the hole at  the backside of the mixer and pull 

the cover upwards. Take care to the O-ring.

Attention:  After installing the battery, the mixer may not activated for 1 min because of 
adjusting itself.

Cleaning washbasin (4)

Cover the infrared sensor by hand, after 4 s remove slowly  the hand , the automatic 

water stop is activated for 1 min.

adjusting lever

infrared sensor with

light emitting diode

(LED)

cover

7 7/8"

+3/8"

cold

hot