DELL N20xx Benutzerhandbuch

Getting Started Guide

automatically assigns the highest access level

[Privilege Level 15] to this account. You can use Dell

Network Manager or other management interfaces to

change this setting, and to add additional management

system information later. For more information on

adding management systems, see the user documentation.

To add a management station:

Please enter the SNMP community string to be used.

[public]:

public

NOTE:

If it is configured, the default access level is set to the highest available

access for the SNMP management interface. Initially only SNMPv2 will be
activated. SNMPv3 is disabled until you return to configure security access for
SNMPv3 (e.g. engine ID, view, etc.).

Please enter the IP address of the Management System

(A.B.C.D) or wildcard (0.0.0.0) to manage from any

Management Station. [0.0.0.0]:

10.1.2.100

Step 2:

Now we need to set up your initial privilege (Level

15) user account. This account is used to login to the

CLI and Web interface. You may set up other accounts

and change privilege levels later. For more

information on setting up user accounts and changing

privilege levels, see the user documentation.

To set up a user account:

Please enter the user name. [root]:

admin

Please enter the user password:

********

Please reenter the user password:

********

Step 3:

Next, an IP address is set up on the VLAN 1 routing

interface.

You can use the IP address to access the CLI, Web

interface, or SNMP interface of the switch.