Dometic 210 Benutzerhandbuch

Seite von 8
6
SEALAND ToILET 
bASE ASSEMbLY
bAND CLAMp 
fASTENER
fLuSH bALL
SpRING 
CARTRIDGE
WATER VALVE ASSEMbLY
Top VALVE CAp
fILTER SCREEN
WATER 
VALVE 
SCREWS
VALVE boDY
SHAfT
fLuSH pEDAL
pEDAL 
CoVER
bAND 
CLAMp
SEAL
DISK
SEALAND ToILET boWL,  
REAR VIEW
VACuuM 
bREAKER
WATER VALVE HoSE 
CoNNECTIoN
VACuuM bREAKER/boWL CoNNECTIoN
 TRoubLESHooTING GuIDE
1.  Toilet emits odor (flush ball 
open).
2.  Water will not stay in bowl.
 
 
 
 
 
3.  Flush ball will not close  
completely.
a.  Odor emitting from base of 
toilet.
b.  Plugged holding tank vent 
line.
a.  Loose band clamp.
b.  Improper seal around flush 
ball due to dirt or debris on 
flush ball.
c.  Worn or damaged seal.
d.  Worn or damaged flush ball. 
a.  Too much friction between 
flush ball and ball seal.
b.  Water valve screws are too 
tight.
a.  Use SeaLand brand  
deodorants.
b.  Clear obstruction from vent 
line.
a.  Tighten band clamp fastener.
b.  Inspect flush ball for foreign 
debris. Clean flush ball if 
needed. 
c.  Replace seal.
d.  Replace flush ball. 
a.  Lubricate between flush ball 
and seal with lubricant (e.g. 
silicone spray, furniture polish).
b.  Loosen screws slightly.
 
problem 
possible Cause 
Service Instructions
HAND SpRAYER 
HoSE CoNNECTIoN*
STRAIN RELIEf 
bRACKET*
*  Applies only to toilet models 
  supplied with hand sprayers.