GE PMCS 6.15 Benutzerhandbuch

Welcome to the Enervista PMCS 6.15 Quick start Guide.  The intent of this guide is to quickly walk a 

user through the basic configuration and operation steps in order to view data from a GE Multilin 

device.  It is not intended to illustrate or explain advanced features and configurations such as adding 

generic Modbus devices or creating/using custom one-line screens/wizards.  Questions of this nature 

should be addressed in the Enervista PMCS 6.15 documentation found in the CD/Tech_Doc/GE_CD. 

 

By the end of the guide a user should be able to do the following 

 

•  Add a GE Multilin Modbus RTU/TCP/IP device to PMCS 6.15.  
•  View device generated Events/Alarms from the device 

•  View waveforms from the device (if supported by device) 

 

Below is a simple system combining all the base elements of a PMCS 6.15 system comprised of the 

following elements: Modbus RTU and Modbus TCP/IP devices, Multinet Gateway, Multilink Ethernet 

switch and the host PC running Enervista PMCS.   

 

 

 

1 GHz processor 

512 MB RAM 

Video capable of displaying 16-bit, 1024x768 resolution 

700 Mb of available space required on system drive, 40GB of available space required on 

installation drive 

Internet Explorer 5.5 with Service Pack 1 or greater 

Windows 2000 SP4, Windows XP SP2 or Windows 2003 Server R2 

IIS Installed (on PMCS Server for Remote Viewing capabilities) 

 

3