Everpure EV9100-91 Merkblatt
Installation and Operation Guide
HFC-10 Deliming System for Ware Washing Equipment
BENEFITS
• Permanently plumbed in the hot water feed line before booster heater and
dishwasher.
• Drastically reduces maintenance teardowns due to limescale accumulation.
• Assures high efficiency of heating elements by removing limescale deposits.
• Utilizes Everpure’s proprietary foodgrade delimer ScaleKleen
• Assures high efficiency of heating elements by removing limescale deposits.
• Utilizes Everpure’s proprietary foodgrade delimer ScaleKleen
™
— no offensive
odors, no burned skin or clothing, environmentally safe.
• High grade re-enforced nylon components forlong life.
• Extends life of equipment.
• Extends life of equipment.
APPLICATIONS
• Flash steamers
• Conventional steamers
• Combi-ovens
• Coffee/espresso machines
• Conventional steamers
• Combi-ovens
• Coffee/espresso machines
DEMLIMING SCHEDULE
Dishwasher Operation (Hours)
Water Hardness
2-8
8-14
14-20
Soft, 0-3 gpg
30 days
24 days
18 days
Moderately Hard, 3-7 gpg
24 days
18 days
12 days
Very Hard, > 15 gpg
9 days
6 days
3 days
To determine water hardness and frequency of deliming, follow instructions
on hardness test strip package and compare to hours of operation.
SPECIFICATIONS
Dimensions: 12
1
⁄
2
"L x 5
1
⁄
2
"W x 5
1
⁄
2
"D
(allow extra 4" underneath for shell removal)
Inlet connection: 1/2" MPT
Pressure (Minimum - Maximum): 10 - 125 psi (non-shock)
Maximum temperature: 160°F
Shipping weight: 5 lbs.
Operating weight: 7 lbs.
Pressure (Minimum - Maximum): 10 - 125 psi (non-shock)
Maximum temperature: 160°F
Shipping weight: 5 lbs.
Operating weight: 7 lbs.
INSTALLATION
Note: System must be installed on inlet water line to equipment.
Everpurerecommends the installation of a by-pass for de-liming.
1. Turn off power to equipment and drain water from system, if necessary.
2. Provide appropriate tee connections for inlet and outlet connections. Refer to the
1. Turn off power to equipment and drain water from system, if necessary.
2. Provide appropriate tee connections for inlet and outlet connections. Refer to the
diagram at right.
3. Install a bypass valve (buyer provided) between the inlet and outlet connections.
Refer to the diagram at right.
4. Install ball valves to inlet and outlet connections on the HFC-10 head assembly.
NOTE: Always use a good grade of pipe dope or teflon tape on connections.
5. Make appropriate connections to ball valves.
NOTE: Always use a good grade of pipe dope or teflon tape on connections.
5. Make appropriate connections to ball valves.
Printed in U.S.A.
EV3095-06E AU05
Provides simple, efficient deliming of commercial ware washing
equipment, utilizing ScaleKleen™, Everpure’s proprietary scale remover.
System Part No. EV9100-91
Includes:
Includes:
(1) 2.2 lb. Scalekleen package
(1) Diptube assembly
(1) Hardness Test Strip
FLOW
BALL VALVE
BYPASS VALVE
SPARE PARTS:
1. EV3095-02: Head Assembly
2. EV3095-04: Gasket
3. EV3095-03: Sump Assembly
4. EV3093-35: Dip Tube
2. EV3095-04: Gasket
3. EV3095-03: Sump Assembly
4. EV3093-35: Dip Tube
EV3095-44: Bracket Kit (bracket, nut, mtg. screws)
EV9796-01: ScaleKleen 2.2 lb. pkg. (4 pack)
EV3024-94: Hardness Test Strip
EV9796-01: ScaleKleen 2.2 lb. pkg. (4 pack)
EV3024-94: Hardness Test Strip
1
2
3
2
3
4