Yamaha RX-V3800 Benutzerhandbuch

Use the Pure Direct mode to enjoy the pure fidelity sound 
of the selected source. When the Pure Direct mode is 
activated, this unit plays back the selected source with the 
least circuitry.

N

PURE DIRECT

F

PURE DIRECT

The F

 button on the front panel lights up 

and the front panel display automatically turns off while 
this unit is in the Pure Direct mode.

• When this unit is in the Pure Direct mode, this unit does not 

output any video signals at the MONITOR OUT jacks and the 
HDMI OUT jack.

• When you set Audio input jack selects to “AUTO”, “HDMI”, or 

“COAX/OPT” (see page 42) and play back the bitstreams or 
multi-channel PCM sources, this unit activates the 
corresponding decoder.

• The following operations are not possible when this unit is in 

the Pure Direct mode:
– switching the sound field program
– displaying the GUI screen
– operating video functions (video conversion, etc.)

• The Pure Direct mode is automatically canceled whenever this 

unit is turned off.

y
The front panel display turns on momentarily when an operation 
is performed.

Use this feature to adjust the balance of bass and treble for 
the front L/R and center speaker channels and the 
subwoofer channel.

E

TONE CONTROL

O

PROGRAM

Control range: –6.0 dB to +6.0 dB

• If you increase or decrease the high-frequency or the 

low-frequency sound to an extreme level, the tonal quality of 
the surround speakers may not match that of the front L/R and 
center speakers and the subwoofer.

• TONE CONTROL is not effective when PURE DIRECT is 

selected, or when MULTI CH is selected as the input source.

y
Use “Tone Control” parameter in “Sound” menu to adjust the 
balance of bass and treble output to your speakers or headphones 
by using GUI screen. See page 86 for details.

Before performing the following operation, set the operation 
mode selector on the remote control to D

.