Yamaha X-V2600 Benutzerhandbuch

• If the ERROR or WARNING screens appears, check the cause of the problem and then perform the AUTO SETUP procedure again.
• If warning W-1 or W-4 appears, corrections are made, but they may not be optimal.
• If warning W-2 or W-3 appears, no corrections are made.
• If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.

■ HDMI

Speaker polarity is not correct. This 
message may appear depending on the 
speakers even when the speakers are 
connected correctly.

Check the speaker connections for proper polarity 
(+ or –).

The distance between the speaker and the 
listening position is over 24 m (80 ft).

Bring the speaker closer to the listening position.

—

The difference of volume level among 
speakers is excessive. (No level correction 
is made.)

Readjust the speaker installation so that all speakers 
are set in locations with similar conditions.

—

Check the speaker connections.

Use speakers of similar quality.

—

Adjust the output volume of the subwoofer.

The Wiring results are incompatible with 
the current user settings.

The current user settings will take priority.

—

More than 5 HDMI components including 
this unit are connected.

Reduce the number of the connected HDMI 
components.

—

HDCP testing failed.

Check that the connected HDMI components support 
the HDCP copy protection standards.

—