Yamaha AVENTAGE RX-A2020 Benutzerhandbuch

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

❑ Front Presence

Selects whether or not front presence speakers are connected.

❑ Rear Presence

Selects whether or not rear presence speakers are connected.

• This setting is not available when “Surround” or “Front Presence” is set to “None”.

❑ Subwoofer 1, Subwoofer 2

Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or 
SUBWOOFER 2 jack and its phase.

• When the bass sound is lacking or unclear, switch the subwoofer phase.

❑ SWFR Layout

Selects a subwoofer layout when 2 subwoofers are used.

• This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.

❑ Extra Bass

Sets the speakers to produce the front channel low-frequency components.

• This setting is not available when both “Subwoofer 1” and “Subwoofer 2” are set to “None”, or when “Front” 

is set to “Small”.

■

Sets the distance between each speaker and listening position so that sounds from the 
speakers reach the listening position at the same time. First, select the unit of distance 
from “Meter” or “Feet”.

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, 
Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, 
Subwoofer 2

0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments

3.00 m (10.0 ft)

Use (default)

Select this option when front presence speakers are connected.

None

Select this option when no front presence speakers are connected.

Use

Select this option when rear presence speakers are connected.

None (default)

Select this option when no rear presence speakers are connected.

Use

Normal 
(default)

Select this option when a subwoofer is connected to the 
SUBWOOFER 1 or SUBWOOFER 2 jack (phase not reversed). The 
subwoofer will produce LFE (low-frequency effect) channel audio and 
low-frequency components from other channels.

Reverse

Select this option when a subwoofer is connected to the 
SUBWOOFER 1 or SUBWOOFER 2 jack (phase reversed). The 
subwoofer will produce LFE (low-frequency effect) channel audio and 
low-frequency components from other channels.

None

Select this option when no subwoofer is connected to the 
SUBWOOFER 1 or SUBWOOFER 2 jack. The front speakers will 
produce LFE (low-frequency effect) channel audio and low-frequency 
components from other channels when both “Subwoofer 1” and 
“Subwoofer 2” are set to “None”.

Left + Right

Select this option when 2 subwoofers are placed on the left and right 
sides of the room.

Front + Rear

Select this option when 2 subwoofers are placed on the front and rear 
sides of the room.

Monaural x2 
(default)

Select this option when 2 subwoofers are placed freely.

Off (default)

Depending on the size of the front speakers, either the subwoofer or 
front speakers produce the front channel low-frequency components.

On

Both the front speakers and subwoofer produce the front channel 
low-frequency components.