Yamaha HTR-6060 Benutzerhandbuch

Seite von 127
Quick start guide
9
 En
INTR
ODUCTION
English
1
Turn on the video monitor connected to this 
unit.
2
Press E
SCENE1 button.
“DVD Viewing” appears in the front panel display, 
and this unit automatically optimize own status for 
the DVD playback.
y
The indicator on the selected SCENE button lights up while 
this unit is in the SCENE mode.
3
Start playback of the desired DVD on your 
player.
y
If the connected DVD player is a Yamaha product and has 
capability of the SCENE control signals with the REMOTE 
OUT jack of this unit (see page 23), this unit can 
automatically activate the DVD player and start playback 
when you press the ESCENE1 button. Refer to the 
instruction manual of the DVD player for further 
information.
4
Rotate 0
VOLUME to adjust the volume.
When you change the input source or sound field program, 
the SCENE mode is deactivated, and the indicator on the 
selected SCENE button turns off.
■ Using the other SCENE buttons
In the following cases, try pressing the corresponding 
SCENE button to enjoy the playback of the desired 
sources.
Case A: “I want to listen to a music disc from the 
connected DVD player as the background 
music for this room...”
 Press E
SCENE2 (or 
F
SCENE2) to select “Disc 
Listening”.
Case B: “I want to watch a TV program...”
 Press E
SCENE3 (or 
F
SCENE3) to select “TV 
Viewing”.
Case C: “I want to listen to a music program of the 
FM/AM radio station...”
 Press E
SCENE4 (or 
F
SCENE4) to select “Radio 
Listening”.
Step 3: Turn on the power and 
press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to 
“6
Ω MIN” before using this unit (see page 25). 4 ohm 
speakers can be also used as the front speakers (see 
page 90).
Note