Kenwood VR-9080 Benutzerhandbuch

1 Use the INPUT SELECTOR key or the Input Selector keys to select

2 Set the MD or TAPE recorder to record.

3 Press and hold the DIMMER key for more than 2 seconds for the

1 REC MODE off
2 REC MODE AUTO

: The digital input signals (DTS, Dolby Digi-

tal, or PCM) are identified automatically
and converted into stereo signals that
are ready for recording.

3 REC MODE MANUAL : The digital input signals (DTS, Dolby Digi-

tal, or PCM) are identified and converted
into stereo signals that are ready for
recording.
Once the digital signal is changed to
other signal, no signal is output.

4 Start playback, then start recording.

• If the audio reproduction stops in the middle due to change in the

input signals, etc., press the DIMMER key.

1 Use the INPUT SELECTOR key or the Input selector keys to select

2 Set the video recorder connected to VIDEO 1 to record.

• Select the REC MODE to record a digital input source.

3 Start playback, then start recording.

• Recording may not be normal for some video software. This is due

to the copy guard condition.

E

1 Use the INPUT SELECTOR key or the Input Selector keys to select

2 Set the MD or TAPE recorder to record.

3 Start playback, then start recording.

*5557/27-32/EN

05.7.16, 1:26 PM

30