Kenwood KRF-V5300D Benutzerhandbuch

English

Distance setting ("DISTANCE")

This sets the distance from each speaker to the listening position.

œ Measure the distance from the listening position to

each speaker and jot down in the table below.

Speaker

Indicator

Distance from the listening
position

Front speaker (left)

"L"

feet (meters)

Center speaker

"C"

feet (meters)

Front speaker (right)

"R"

feet (meters)

Surround speaker (right)

"RS"

feet (meters)

Surround speaker (left)

"LS"

feet (meters)

Subwoofer

"SW"

feet (meters)

∑ See <Getting into the setup mode> (

&) and

select "DISTANCE".

é Use [MULTI CONTROL

5/∞] to select the distance

to the front speaker.

• Adjustment will start from front left speaker.

Indicator

® Press [SETUP].

† Repeat steps é – ® to input the distance for the

rest of the speaker.

¥ Go to the next setting, "LFE LVL".

• If you wish to exit the setup mode, see <To exit the setup mode>

Low frequency effects level
("LFE LVL")

Low frequency effect signal is used exclusively for giving the field
effect of bass tone in the Dolby Digital and DTS signal.

œ See <Getting into the setup mode> (

&) and

select "LFE LVL".

∑ Use [MULTI CONTROL

5/∞] to adjust the low

frequency effect level.

• The level is adjusted from 0dB to -10dB in 1dB step decrements.

é Press [SETUP].

• The setup is complete when the "EXIT" indication appears.

® Press [SETUP] to exit the setup mode.

B60-5738-00_00.indd 19

08.4.23 11:39:10 AM